Refine
Document Type
Language
- English (2) (remove)
Keywords
- high throughput (1)
- laser processing (1)
- nanosecond pulsed laser (1)
- polygon mirror scanner (1)
- polygon scanner (1)
- ultra-fast (1)
Laser engraving requires a precise ablation per pulse through all layers of a depth map. To transform this process towards areas of a square meter and more within an acceptable time, needs high-power ultra-short pulsed lasers for the precision and a high scan speed for the beam distribution. Scan speeds in the range of several 100 m/s can be achieved with a polygon scanner. In this work, a polygon scanner has been utilized within a roll-engraving machine to treat an 800 x 220 mm² (L x Dia) roll with 0.55 m² in a laser engraving process. The machine setup, the processing strategy and the data handling has been investigated and result in an efficient large area process. Pre-tests were performed with a multi-MHz-frequency nanosecond-pulsed laser, to investigate the processing strategy. A method to overcome the duty cycle of the polygon scanner was found in the synchronization of two polygons, enabling the use on a single laser source in a time-sharing concept. The throughput and the utilization of the laser source can be increased by the factor of two
Increasing speed in laser processing is driven by the development of high-power lasers into ranges of more than 1 kW. Additionally, a proper distribution of these laser power is required to achieve high quality processing results. In the case of high pulse repletion rates, a proper distribution of the pulses can be obtained from ultrafast beam deflection in the range of several 100 m/s. A two-dimensional polygon mirror scanner has been used to distribute a nanosecond pulsed laser with up to 1 kW average power at a wavelength of 1064 nm for multi pass laser engraving. The pulse duration of this laser can be varied between 30 ns and 240 ns and the pulse repetition rate is set between 1 and 4 MHz. The depth information is included in greyscale bitmaps, which were used to modulate the laser during the scanning accordingly to the lateral position and the depth. The process allows high processing rates and thus high throughput.